Analog signal transmit with wireless
Instruction
1. Analog signal transmission with wireless
2. Communication range: >200 meters (Open space)
3. Input signal from load cell: -19.5mV~ +19.5mV
4. Output signal to Indicator: 0 ~ 25mV
For AWT sender:
Accuracy | 1/100,000 for load cell |
Input signal range | -19.5mV ~ +19.5mV |
Connect Load cell | 1 to 4 pcs load cell or 1 to 12pcs load cell |
Load cell excitation | DC5V |
Load cell connection mode | 4 wires |
Wireless Frequency | 433MHZ~470MHZ |
Power supply | Rechargeable battery 7.4V / 2400mAh or 8.4V / 1A charger |
Switch | Red waterproof button |
Antenna | Elbow antenna, can swing up and down |
Led light | It will twinkle when working |
Connect Interface | 4PIN plug connect to load cell, PIN1:E- (Excitation-) PIN2:S+ (Signal+) PIN3:S- (Signal -) PIN4:E+ (Excitation +) |
Working temperature | -10 ℃ to +60 ℃ |
Dimension(mm) | Aluminum 135 x 75 x 35 (black) |
For AWT receiver:
Accuracy | 1/10,000 for Indicator |
Output analog signal | 0mV ~ 25mV |
Connect indicator | Analog indicator |
indicator connection mode | 4 wire (E-,S+,S-,E+) |
Wireless Frequency | 433MHZ~470MHZ |
Power supply | Rechargeable battery 7.4V / 2400mAh or 8.4V / 1A charger |
Switch | Red waterproof button |
Antenna | Elbow antenna, can swing up and down |
Led light | It will twinkle when working |
Connect Interface | 5PIN plug connect to indicator, PIN1:E- (Excitation-) PIN2:S+ (Signal+) PIN3:S- (Signal -) PIN4:E+ (Excitation +) PIN5:NC |
Working temperature | -10 ℃ to +60 ℃ |
Dimension(mm) | Aluminum 135 x 75 x 35 (black) |